[oe] [PATCH 4/4] lirc: Add recipe for 0.9.2
Khem Raj
raj.khem at gmail.com
Sun Mar 1 22:25:08 UTC 2015
There is a older version available at meta-guacamayo
but its not distro specific and many distros might need it
so meta-oe is right place for it.
Change-Id: Ic6b45dd652187d72a1e1bf4fb5adc8ed9c80e52a
Signed-off-by: Khem Raj <raj.khem at gmail.com>
---
meta-oe/recipes-connectivity/lirc/lirc.inc | 14 +
.../recipes-connectivity/lirc/lirc/lirc.tmpfiles | 1 +
.../lirc/lirc/lirc_options.conf | 24 ++
meta-oe/recipes-connectivity/lirc/lirc/lircd.conf | 315 +++++++++++++++++++++
meta-oe/recipes-connectivity/lirc/lirc/lircd.init | 40 +++
.../recipes-connectivity/lirc/lirc/lircd.service | 20 ++
.../recipes-connectivity/lirc/lirc/lircexec.init | 37 +++
meta-oe/recipes-connectivity/lirc/lirc_0.9.2.bb | 66 +++++
8 files changed, 517 insertions(+)
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc.inc
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc/lirc.tmpfiles
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc/lirc_options.conf
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc/lircd.conf
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc/lircd.init
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc/lircd.service
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc/lircexec.init
create mode 100644 meta-oe/recipes-connectivity/lirc/lirc_0.9.2.bb
diff --git a/meta-oe/recipes-connectivity/lirc/lirc.inc b/meta-oe/recipes-connectivity/lirc/lirc.inc
new file mode 100644
index 0000000..9a10c32
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc.inc
@@ -0,0 +1,14 @@
+DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls."
+DESCRIPTION_append_lirc = " This package contains the lirc daemon, libraries and tools."
+DESCRIPTION_append_lirc-exec = " This package contains a daemon that runs programs on IR signals."
+DESCRIPTION_append_lirc-remotes = " This package contains some config files for remotes."
+DESCRIPTION_append_lirc-nslu2example = " This package contains a working config for RC5 remotes and a modified NSLU2."
+HOMEPAGE = "http://www.lirc.org"
+SECTION = "console/network"
+LICENSE = "GPLv2"
+DEPENDS = "alsa-lib libftdi"
+PRIORITY = "optional"
+
+SRC_URI = "http://prdownloads.sourceforge.net/lirc/lirc-${PV}.tar.bz2"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
diff --git a/meta-oe/recipes-connectivity/lirc/lirc/lirc.tmpfiles b/meta-oe/recipes-connectivity/lirc/lirc/lirc.tmpfiles
new file mode 100644
index 0000000..0b80e2e
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc/lirc.tmpfiles
@@ -0,0 +1 @@
+d /run/lirc 0755 root root -
diff --git a/meta-oe/recipes-connectivity/lirc/lirc/lirc_options.conf b/meta-oe/recipes-connectivity/lirc/lirc/lirc_options.conf
new file mode 100644
index 0000000..d8ddedd
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc/lirc_options.conf
@@ -0,0 +1,24 @@
+# These are the default options to lircd, if installed as
+# /etc/lirc/lirc_options.conf. See the lircd(8) and lircmd(8)
+# manpages for info on the different options.
+
+[lircd]
+nodaemon = False
+permission = 666
+driver = default
+device = /dev/lirc0
+output = /var/run/lirc/lircd
+pidfile = /var/run/lirc/lircd.pid
+plugindir = /usr/lib/lirc/plugins
+allow-simulate = No
+repeat-max = 600
+#listen = [address:]port
+#connect = host[:port]
+#debug = 5
+#uinput = ...
+#release = ...
+#logfile = ...
+
+[lircmd]
+uinput = False
+nodeamon = False
diff --git a/meta-oe/recipes-connectivity/lirc/lirc/lircd.conf b/meta-oe/recipes-connectivity/lirc/lirc/lircd.conf
new file mode 100644
index 0000000..29b03c7
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc/lircd.conf
@@ -0,0 +1,315 @@
+# contributed by angelo castello
+#
+# note: this config file has been deduced starting from the
+# raw codes provided to run mode2 utility.
+#
+# brand: futarque
+
+begin remote
+ name futarque
+ bits 8
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 8048 3898
+ one 555 1436
+ zero 555 439
+ gap 113123
+ ptrail 555
+ pre_data_bits 8
+ pre_data 0x54
+ pre 570 3890
+
+ begin codes
+ MUTE 0x70
+ EXIT 0xA8
+ POWER 0xF0
+ CHANNEL_UP 0x50
+ CHANNEL_DOWN 0xD0
+ VOLUME_UP 0x30
+ VOLUME_DOWN 0xB0
+ OK 0x98
+ FAVORITES 0x04
+ TEXT 0x68
+ EPG 0xC8
+ BACK 0x48
+ MENU 0x88
+ 1 0x00
+ 2 0x80
+ 3 0x40
+ 4 0xC0
+ 5 0x20
+ 6 0xA0
+ 7 0x60
+ 8 0xE0
+ 9 0x10
+ 0 0x90
+ PAUSE 0x84
+ INFO 0x38
+ RED 0xE8
+ GREEN 0x08
+ YELLOW 0x28
+ BLUE 0x78
+ UP 0xD8
+ DOWN 0xB8
+ REWIND 0x44
+ FASTFORWARD 0x24
+ PLAYPAUSE 0xC4
+ STOP 0x64
+ RECORD 0xA4
+ AUDIO 0xE4
+ TAPE 0x14
+ DVD 0x94
+ CAPITAL_A 0xF8
+ CAPITAL_B 0x54
+ end codes
+
+end remote
+
+# brand: STM PVR-1
+
+begin remote
+ name stm_pvr_1
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 150
+
+ header 9000 4500
+ one 572 1700
+ zero 572 572
+ ptrail 572
+ repeat 9000 2200
+ pre_data_bits 16
+ pre_data 0xFE
+ gap 100000
+
+ begin codes
+ POWER 0x00ff
+ FAVORITES 0x7887
+ MUTE 0x28d7
+ 0 0x708F
+ 1 0xc03f
+ 2 0x40bf
+ 3 0x807f
+ 4 0xe01f
+ 5 0x609f
+ 6 0xa05f
+ 7 0xd02f
+ 8 0x50af
+ 9 0x906f
+ INFO 0x38c7
+ SUBTITLE 0xe817
+ MENU 0x9867
+ EXIT 0x20df
+ EPG 0xa857
+ BACK 0x48b7
+ CURSOR_UP 0x58a7
+ CURSOR_DOWN 0xd827
+ CURSOR_LEFT 0x8877
+ CURSOR_RIGHT 0xb04f
+ OK 0x10ef
+ VOLUME_UP 0x22dd
+ VOLUME_DOWN 0x8a75
+ CHANNEL_UP 0x12ed
+ CHANNEL_DOWN 0x4ab5
+ TEXT 0xf00f
+ RADIO 0x926d
+ ZOOM 0x6897
+ AUDIO 0x08f7
+ RED 0x42bd
+ GREEN 0xa25d
+ YELLOW 0x827d
+ BLUE 0x02fd
+ CUSTOM0 0x52ad
+ CUSTOM1 0x30cf
+ PLAY 0x629d
+ PAUSE 0xb24d
+ PREVIOUS 0xc837
+ NEXT 0xf807
+ REWIND 0x32cd
+ FASTFORWARD 0x0af5
+ AUX 0x7a85
+ CUSTOM3 0xb847
+ PIP 0x3ac5
+ SWAP 0xba45
+ end codes
+
+end remote
+
+# brand: STM DTV-2
+
+begin remote
+
+ name stm_dtv_2
+ flags SHIFT_ENC|CONST_LENGTH
+ bits 13
+ aeps 150
+
+ one 850 850
+ zero 850 850
+ plead 850
+ gap 67800
+ toggle_bit 2
+
+ begin codes
+ POWER 0x100C
+ FAVORITES 0x1015
+ AUX 0x1038
+ 1 0x1001
+ 2 0x1002
+ 3 0x1003
+ 4 0x1004
+ 5 0x1005
+ 6 0x1006
+ 7 0x1007
+ 8 0x1008
+ 9 0x1009
+ PERIOD 0x1024
+ 0 0x103E
+ BACK 0x1023
+ MENU 0x1016
+ INFO 0x100F
+ EPG 0x101E
+ EXIT 0x1018
+ CURSOR_UP 0x1017
+ CURSOR_DOWN 0x101D
+ CURSOR_LEFT 0x1019
+ CURSOR_RIGHT 0x101B
+ OK 0x101A
+ VOLUME_UP 0x1010
+ VOLUME_DOWN 0x1011
+ CHANNEL_UP 0x1020
+ CHANNEL_DOWN 0x1021
+ TEXT 0x102E
+ SUBTITLE 0x103C
+ FREEZE 0x1014
+ ZOOM 0x102B
+ RED 0x1028
+ GREEN 0x102A
+ YELLOW 0x102F
+ BLUE 0x1030
+ CUSTOM10 0x1022
+ INTERNET 0x1027
+ CUSTOM11 0x102C
+ AUDIO 0x1025
+ RECORD 0x102D
+ PLAYPAUSE 0x1029
+ STOP 0x1026
+ CUSTOM1 0x101C
+ MUTE 0x100d
+ CUSTOM12 0x101F
+ PIP 0x100B
+ SWAP 0x100E
+ end codes
+
+end remote
+
+# brand: Comcast
+# model no. of remote control: XR2
+# 32 bits for the pre-date (should be value 0x170F443E)
+# width between pre_bits and data: 12900 microseconds
+#
+# 24 bits for the data (key code)
+# To get key REPEAT, XOR 0x088 with KEY value
+# There are 8 post bits (both should be zero)
+#
+# Gap between keys: 8100 microseconds
+begin remote
+
+ name Xfinity-XR2
+ bits 24
+ flags XMP
+ eps 20
+ aeps 300
+
+ one 0 137
+ zero 250 710
+ ptrail 250
+ pre_data_bits 32
+ pre_data 0x170F443E
+ post_data_bits 8
+ post_data 0x0
+ pre 250 12921
+ gap 81698
+ toggle_bit_mask 0x0
+
+ begin codes
+ 1 0x1E0001
+ 1_repeat 0x168001
+ 2 0x1D0002
+ 2_repeat 0x158002
+ 3 0x1C0003
+ 3_repeat 0x148003
+ 4 0x1B0004
+ 4_repeat 0x138004
+ 5 0x1A0005
+ 5_repeat 0x128005
+ 6 0x190006
+ 6_repeat 0x118006
+ 7 0x180007
+ 7_repeat 0x108007
+ 8 0x170008
+ 8_repeat 0x1F8008
+ 9 0x160009
+ 9_repeat 0x1E8009
+ 0 0x1F0000
+ 0_repeat 0x178000
+ OK 0x180025
+ OK_repeat 0x108025
+ POWER 0x10000F
+ POWER_repeat 0x18800F
+ UP 0x1C0021
+ UP_repeat 0x148021
+ DOWN 0x1B0022
+ DOWN_repeat 0x138022
+ LEFT 0x1A0023
+ LEFT_repeat 0x128023
+ RIGHT 0x190024
+ RIGHT_repeat 0x118024
+ REWIND 0x190033
+ REWIND_repeat 0x118033
+ PLAY 0x1C0030
+ PLAY_repeat 0x148030
+ FASTFORWARD 0x180034
+ FASTFORWARD_repeat 0x108034
+ RECORD 0x170035
+ RECORD_repeat 0x1F8035
+ REPLAY 0x170053
+ REPLAY_repeat 0x1F8053
+ A 0x190060
+ A_repeat 0x118060
+ B 0x180061
+ B_repeat 0x108061
+ C 0x170062
+ C_repeat 0x1F8062
+ D 0x160063
+ D_repeat 0x1E8063
+ PAGE_UP 0x150028
+ PAGE_UP_repeat 0x1D8028
+ PAGE_DOWN 0x140029
+ PAGE_DOWN_repeat 0x1C8029
+ GUIDE 0x160027
+ GUIDE_repeat 0x1E8027
+ MENU 0x1D0020
+ MENU_repeat 0x158020
+ EXIT 0x13002A
+ EXIT_repeat 0x1B802A
+ INFO 0x170026
+ INFO_repeat 0x1F8026
+ LAST 0x190051
+ LAST_repeat 0x118051
+ VOLUME_UP 0x15000A
+ VOLUME_UP_repeat 0x1D800A
+ CHANNEL_UP 0x12000D
+ CHANNEL_UP_repeat 0x1A800D
+ VOLUME_DOWN 0x14000B
+ VOLUME_DOWN_repeat 0x1C800B
+ CHANNEL_DOWN 0x11000E
+ CHANNEL_DOWN_repeat 0x19800E
+ MUTE 0x13000C
+ MUTE_repeat 0x1B800D
+ end codes
+
+end remote
diff --git a/meta-oe/recipes-connectivity/lirc/lirc/lircd.init b/meta-oe/recipes-connectivity/lirc/lirc/lircd.init
new file mode 100644
index 0000000..8b124af
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc/lircd.init
@@ -0,0 +1,40 @@
+#! /bin/sh
+#
+# This is an init script for Familiar
+# Copy it to /etc/init.d/lircd and type
+# > update-rc.d lircd defaults 20
+#
+
+
+test -f /usr/sbin/lircd || exit 0
+test -f /etc/lircd.conf || exit 0
+
+case "$1" in
+ start)
+ echo -n "Starting lirc daemon: lircd"
+ start-stop-daemon --start --quiet --exec /usr/sbin/lircd -- --device=/dev/lirc0
+ echo "."
+ ;;
+ stop)
+ echo -n "Stopping lirc daemon: lircd"
+ start-stop-daemon --stop --quiet --exec /usr/sbin/lircd
+ echo "."
+ ;;
+ reload|force-reload)
+ start-stop-daemon --stop --quiet --signal 1 --exec /usr/sbin/lircd
+ ;;
+ restart)
+ echo -n "Stopping lirc daemon: lircd"
+ start-stop-daemon --stop --quiet --exec /usr/sbin/lircd
+ sleep 1
+ echo -n "Starting lirc daemon: lircd"
+ start-stop-daemon --start --quiet --exec /usr/sbin/lircd -- --device=/dev/lirc0
+ echo "."
+ ;;
+ *)
+ echo "Usage: /etc/init.d/lircd {start|stop|reload|restart|force-reload}"
+ exit 1
+esac
+
+exit 0
+
diff --git a/meta-oe/recipes-connectivity/lirc/lirc/lircd.service b/meta-oe/recipes-connectivity/lirc/lirc/lircd.service
new file mode 100644
index 0000000..c866136
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc/lircd.service
@@ -0,0 +1,20 @@
+[Unit]
+Description=LIRC Infrared Signal Decoder
+After=network.target
+
+[Service]
+Type=forking
+EnvironmentFile=/etc/lirc/lircd.conf
+PIDFile=/run/lirc/lircd.pid
+ExecStartPre=/bin/mkdir -p /run/lirc
+ExecStartPre=/bin/rm -f /dev/lircd
+ExecStartPre=/bin/rm -f /run/lirc/lircd
+ExecStartPre=/bin/ln -s /run/lirc/lircd /dev/lircd
+
+ExecStart=/usr/sbin/lircd --pidfile=/run/lirc/lircd.pid --device=/dev/lirc0
+
+ExecStopPost=/bin/rm -f /dev/lircd
+ExecStopPost=/bin/rm -fR /run/lirc
+
+[Install]
+WantedBy=multi-user.target
diff --git a/meta-oe/recipes-connectivity/lirc/lirc/lircexec.init b/meta-oe/recipes-connectivity/lirc/lirc/lircexec.init
new file mode 100644
index 0000000..3a8c1a3
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc/lircexec.init
@@ -0,0 +1,37 @@
+#! /bin/sh
+#
+# This is an init script for Familiar
+# Copy it to /etc/init.d/lircexecd and type
+# > update-rc.d lircexecd defaults 20
+# It must be started after lircd (and it does alphabetically :-)
+# irexec reads /etc/lircrc by default
+
+
+test -f /usr/bin/irexec || exit 0
+test -f /etc/lircrc || exit 0
+
+case "$1" in
+ start)
+ echo -n "Starting lircexec daemon: irexec"
+ start-stop-daemon --start --quiet --exec /usr/bin/irexec -- --daemon
+ echo "."
+ ;;
+ stop)
+ echo -n "Stopping lircexec daemon: irexec"
+ start-stop-daemon --stop --quiet --exec /usr/bin/irexec
+ echo "."
+ ;;
+ restart|force-restart)
+ echo -n "Stopping lircexec daemon: irexec"
+ start-stop-daemon --stop --quiet --exec /usr/bin/irexec
+ sleep 1
+ echo -n "Starting lircexec daemon: irexec"
+ start-stop-daemon --start --quiet --exec /usr/bin/irexec -- --daemon
+ echo "."
+ ;;
+ *)
+ echo "Usage: /etc/init.d/lircexec {start|stop|reload|restart|force-restart}"
+ exit 1
+esac
+
+exit 0
diff --git a/meta-oe/recipes-connectivity/lirc/lirc_0.9.2.bb b/meta-oe/recipes-connectivity/lirc/lirc_0.9.2.bb
new file mode 100644
index 0000000..24374c1
--- /dev/null
+++ b/meta-oe/recipes-connectivity/lirc/lirc_0.9.2.bb
@@ -0,0 +1,66 @@
+require lirc.inc
+
+SRC_URI += " \
+ file://lircd.service \
+ file://lircd.init \
+ file://lircexec.init \
+ file://lircd.conf \
+ file://lirc_options.conf \
+ file://lirc.tmpfiles \
+"
+#file://0001-Adaptation-for-STM-configuration.patch \
+#
+SRC_URI[md5sum] = "3afc84e79c0839823cc20e7a710dd06d"
+SRC_URI[sha256sum] = "4e3f948fcdee6dce009171143f0cb7cd7be48593dd58138db4101a41f651a1dd"
+
+SYSTEMD_PACKAGES = "lirc"
+SYSTEMD_SERVICE_${PN} = "lircd.service lircmd.service"
+SYSTEMD_AUTO_ENABLE_lirc = "enable"
+
+inherit autotools pkgconfig systemd pythonnative
+
+PACKAGECONFIG[systemd] = "--with-systemdsystemunitdir=${systemd_unitdir}/system/,--without-systemdsystemunitdir"
+
+PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd', '', d)}"
+
+#EXTRA_OEMAKE = 'SUBDIRS="lib daemons tools"'
+do_install_append() {
+ install -m 0755 -d ${D}${sysconfdir}
+ install -m 0755 -d ${D}${sysconfdir}/lirc
+ install -m 0755 -d ${D}${systemd_unitdir}/system
+ install -m 0755 -d ${D}${libdir}/tmpfiles.d
+ install -m 0644 ${WORKDIR}/lircd.conf ${D}${sysconfdir}/lirc/
+ install -m 0644 ${WORKDIR}/lirc_options.conf ${D}${sysconfdir}/lirc/
+ install -m 0644 ${WORKDIR}/lircd.service ${D}${systemd_unitdir}/system/
+ install -m 0755 ${WORKDIR}/lircexec.init ${D}${systemd_unitdir}/system/
+ install -m 0644 ${WORKDIR}/lirc.tmpfiles ${D}${libdir}/tmpfiles.d/lirc.conf
+ rm -rf ${D}${libdir}/lirc/plugins/*.la
+ rmdir ${D}/var/run/lirc ${D}/var/run
+}
+
+PACKAGES =+ "${PN}-contrib ${PN}-exec ${PN}-plugins ${PN}-python"
+
+RDEPENDS_${PN}-exec = "lirc"
+RDEPENDS_${PN}-python = "python"
+
+RRECOMMENDS_lirc = "lirc-exec"
+
+FILES_${PN}-plugins = "${libdir}/lirc/plugins/*.so ${datadir}/lirc/configs"
+FILES_${PN}-contrib = "${datadir}/lirc/contrib"
+FILES_${PN}-exec = "${bindir}/irexec ${sysconfdir}/lircexec"
+FILES_${PN} += "${systemd_unitdir}/system/lircexec.init"
+FILES_${PN} += "${systemd_unitdir}/system/lircd.service"
+FILES_${PN} += "${systemd_unitdir}/system/lircd.socket"
+FILES_${PN} += "${libdir}/tmpfiles.d/lirc.conf"
+FILES_${PN}-dbg += "${libdir}/lirc/plugins/.debug"
+FILES_${PN}-python += "${libdir}/python*/site-packages"
+
+
+INITSCRIPT_PACKAGES = "lirc lirc-exec"
+INITSCRIPT_NAME_lirc-exec = "lircexec"
+INITSCRIPT_PARAMS_lirc-exec = "defaults 21"
+
+# this is for distributions that don't use udev
+pkg_postinst_${PN}_append() {
+ if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
+}
--
2.1.4
More information about the Openembedded-devel
mailing list