[oe-users] Problem generating uImage for gumstix

[Steve Sakoman]

That's where I looked initially, but my tmp/deploy directory only has an ipk
subdirectory.  No likely candidates there!

Steve

On 8/17/07, Hans Henry von Tresckow <hvontres at gmail.com> wrote:
>
> try looking in the tmp/deploy folder in your build directory. for my glibc
> builds for poodle they are in tmp/deploy/glibc/images/poodle
>
> On 8/17/07, Steve Sakoman <sakoman at gmail.com> wrote:
> >
> > Hmmm . . . another newbie question!
> >
> > Where does the rootfs image get placed at the end of the build?  Can't
> > seem to find it.
> >
> > I'm assuming that the following line in the machine conf file is what
> > builds it:
> >
> > EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash"
> >
> > Thanks!
> >
> > Steve
> >
> > On 8/17/07, Philip Balister < philip at balister.org> wrote:
> > >
> > > Try again. Thanks for your patience.
> > >
> > > Philip
> > >
> > > Steve Sakoman wrote:
> > > > Philip,
> > > >
> > > > No joy on the build:
> > > >
> > > > Connecting to prdownloads.sourceforge.net|66.35.250.217|:80...
> > > connected.
> > > > HTTP request sent, awaiting response... 301 Moved Permanently
> > > > Location:
> > > > http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net[following]
> > >
> > > <http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net%5Bfollowing%5D>
> > > > 20 redirections exceeded.
> > > > NOTE: Task failed: Fetch failed:
> > > > http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2
> > > > NOTE: package uboot-utils-1.2.0-r6: task do_fetch: failed
> > > >
> > > > According to SourceForce the source for u-boot seems to have moved:
> > > >
> > > > The "U-Boot" Universal Bootloader project provides firmware for many
> > > CPU
> > > > architectures and boards with full source code under GPL. NOTE:
> > > current
> > > > source code is available from DENX git repository and FTP server;
> > > see
> > > > http://www.denx.de/en/Software/GIT
> > > >
> > > > Steve
> > > >
> > > > On 8/16/07, Steve Sakoman <sakoman at gmail.com> wrote:
> > > >> Philip,
> > > >>
> > > >> Thanks!  Just did the pull and update.
> > > >>
> > > >> Build is underway . . .
> > > >>
> > > >> Steve
> > > >>
> > > >> On 8/16/07, Philip Balister < philip at balister.org> wrote:
> > > >>> OK, if you pull and update, you should be able to build a complete
> > > image
> > > >>>
> > > >>> for the gumstix. I fixed uboot-utils so it compiles mkimage, and
> > > added
> > > >>> uboot-utils as a dependency to the linux-gumstix bb file.
> > > >>>
> > > >>> Philip
> > > >>>
> > > >>> Steve Sakoman wrote:
> > > >>>> Koen,
> > > >>>>
> > > >>>> Thanks for your response.  I'm an Open Embedded beginner, so I'm
> > > not
> > > >>> quite
> > > >>>> sure what to do with your suggestion :-)
> > > >>>>
> > > >>>> Should the "DEPENDS" statement be added to the gumstix machine
> > > >>> definition?
> > > >>>> Steve
> > > >>>>
> > > >>>> On 8/15/07, Koen Kooi < koen at dominion.kabel.utwente.nl> wrote:
> > > >>>>> -----BEGIN PGP SIGNED MESSAGE-----
> > > >>>>> Hash: SHA1
> > > >>>>>
> > > >>>>> Philip Balister schreef:
> > > >>>>>> I can confirm this is a problem building Angstrom for a gumstix
> > > with
> > > >>> a
> > > >>>>>> clean tmp directory. I think the problem is that the kernel
> > > build
> > > >>> needs
> > > >>>>>> mkiamge from u-boot, but the gumstix machine does not build
> > > u-boot.
> > > >>> I
> > > >>>>>> tried building u-bbot for the gumstix, but u-boot contains no
> > > config
> > > >>> for
> > > >>>>>> the hardware. Then I tried building uboot-utils and that failed
> > > >>> trying
> > > >>>>>> to unpack :
> > > >>>>>>
> > > >>>>>> org.openembedded.dev /packages/uboot/files/fw_env.config': No
> > > such
> > > >>> file
> > > >>>>>> or directory
> > > >>>>>>
> > > >>>>>> Any thoughts?
> > > >>>>> Yes, DEPENDS = "u-boot-mkimage-openmoko-native" for a 'generic'
> > > >>> mkimage in
> > > >>>>> STAGING_BINDIR_NATIVE.
> > > >>>>>
> > > >>>>> regards,
> > > >>>>>
> > > >>>>> Koen
> > > >>>>> -----BEGIN PGP SIGNATURE-----
> > > >>>>> Version: GnuPG v1.4.5 (Darwin)
> > > >>>>>
> > > >>>>> iD8DBQFGw3UKMkyGM64RGpERAg0wAJ9W1ey+p1fJ9BCj1kngeOTvlSSYKQCgu4kQ
> > > >>>>> 7e3DquN5wj+Ac/xPMtRmPSE=
> > > >>>>> =npCT
> > > >>>>> -----END PGP SIGNATURE-----
> > > >>>>>
> > > >>>>> _______________________________________________
> > > >>>>> Openembedded-users mailing list
> > > >>>>> Openembedded-users at lists.openembedded.org
> > > >>>>>
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> > > >>>>
> > > >>>>
> > > >>>
> > > ------------------------------------------------------------------------
> > > >>>> _______________________________________________
> > > >>>> Openembedded-users mailing list
> > > >>>> Openembedded-users at lists.openembedded.org
> > > >>>>
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> > > >>>
> > > >>> _______________________________________________
> > > >>> Openembedded-users mailing list
> > > >>> Openembedded-users at lists.openembedded.org
> > > >>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> > >
> > > >>>
> > > >>>
> > > >>>
> > > >
> > > >
> > > >
> > > ------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > Openembedded-users mailing list
> > > > Openembedded-users at lists.openembedded.org
> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> > >
> > >
> > > _______________________________________________
> > > Openembedded-users mailing list
> > > Openembedded-users at lists.openembedded.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> > >
> > >
> > >
> >
> > _______________________________________________
> > Openembedded-users mailing list
> > Openembedded-users at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >
> >
>
> _______________________________________________
> Openembedded-users mailing list
> Openembedded-users at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-users/attachments/20070817/01077ea8/attachment-0002.html>