[oe-users] Problem generating uImage for gumstix

[Philip Balister]

There should be something that look like this:

tmp/deploy/glibc/images/efika

probably gumstix instead of Efika.

Philip

Steve Sakoman wrote:
> That's where I looked initially, but my tmp/deploy directory only has an ipk
> subdirectory.  No likely candidates there!
> 
> Steve
> 
> On 8/17/07, Hans Henry von Tresckow <hvontres at gmail.com> wrote:
>> try looking in the tmp/deploy folder in your build directory. for my glibc
>> builds for poodle they are in tmp/deploy/glibc/images/poodle
>>
>> On 8/17/07, Steve Sakoman <sakoman at gmail.com> wrote:
>>> Hmmm . . . another newbie question!
>>>
>>> Where does the rootfs image get placed at the end of the build?  Can't
>>> seem to find it.
>>>
>>> I'm assuming that the following line in the machine conf file is what
>>> builds it:
>>>
>>> EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash"
>>>
>>> Thanks!
>>>
>>> Steve
>>>
>>> On 8/17/07, Philip Balister < philip at balister.org> wrote:
>>>> Try again. Thanks for your patience.
>>>>
>>>> Philip
>>>>
>>>> Steve Sakoman wrote:
>>>>> Philip,
>>>>>
>>>>> No joy on the build:
>>>>>
>>>>> Connecting to prdownloads.sourceforge.net|66.35.250.217|:80...
>>>> connected.
>>>>> HTTP request sent, awaiting response... 301 Moved Permanently
>>>>> Location:
>>>>> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net[following]
>>>> <http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net%5Bfollowing%5D>
>>>>> 20 redirections exceeded.
>>>>> NOTE: Task failed: Fetch failed:
>>>>> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2
>>>>> NOTE: package uboot-utils-1.2.0-r6: task do_fetch: failed
>>>>>
>>>>> According to SourceForce the source for u-boot seems to have moved:
>>>>>
>>>>> The "U-Boot" Universal Bootloader project provides firmware for many
>>>> CPU
>>>>> architectures and boards with full source code under GPL. NOTE:
>>>> current
>>>>> source code is available from DENX git repository and FTP server;
>>>> see
>>>>> http://www.denx.de/en/Software/GIT
>>>>>
>>>>> Steve
>>>>>
>>>>> On 8/16/07, Steve Sakoman <sakoman at gmail.com> wrote:
>>>>>> Philip,
>>>>>>
>>>>>> Thanks!  Just did the pull and update.
>>>>>>
>>>>>> Build is underway . . .
>>>>>>
>>>>>> Steve
>>>>>>
>>>>>> On 8/16/07, Philip Balister < philip at balister.org> wrote:
>>>>>>> OK, if you pull and update, you should be able to build a complete
>>>> image
>>>>>>> for the gumstix. I fixed uboot-utils so it compiles mkimage, and
>>>> added
>>>>>>> uboot-utils as a dependency to the linux-gumstix bb file.
>>>>>>>
>>>>>>> Philip
>>>>>>>
>>>>>>> Steve Sakoman wrote:
>>>>>>>> Koen,
>>>>>>>>
>>>>>>>> Thanks for your response.  I'm an Open Embedded beginner, so I'm
>>>> not
>>>>>>> quite
>>>>>>>> sure what to do with your suggestion :-)
>>>>>>>>
>>>>>>>> Should the "DEPENDS" statement be added to the gumstix machine
>>>>>>> definition?
>>>>>>>> Steve
>>>>>>>>
>>>>>>>> On 8/15/07, Koen Kooi < koen at dominion.kabel.utwente.nl> wrote:
>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>>>>>> Hash: SHA1
>>>>>>>>>
>>>>>>>>> Philip Balister schreef:
>>>>>>>>>> I can confirm this is a problem building Angstrom for a gumstix
>>>> with
>>>>>>> a
>>>>>>>>>> clean tmp directory. I think the problem is that the kernel
>>>> build
>>>>>>> needs
>>>>>>>>>> mkiamge from u-boot, but the gumstix machine does not build
>>>> u-boot.
>>>>>>> I
>>>>>>>>>> tried building u-bbot for the gumstix, but u-boot contains no
>>>> config
>>>>>>> for
>>>>>>>>>> the hardware. Then I tried building uboot-utils and that failed
>>>>>>> trying
>>>>>>>>>> to unpack :
>>>>>>>>>>
>>>>>>>>>> org.openembedded.dev /packages/uboot/files/fw_env.config': No
>>>> such
>>>>>>> file
>>>>>>>>>> or directory
>>>>>>>>>>
>>>>>>>>>> Any thoughts?
>>>>>>>>> Yes, DEPENDS = "u-boot-mkimage-openmoko-native" for a 'generic'
>>>>>>> mkimage in
>>>>>>>>> STAGING_BINDIR_NATIVE.
>>>>>>>>>
>>>>>>>>> regards,
>>>>>>>>>
>>>>>>>>> Koen
>>>>>>>>> -----BEGIN PGP SIGNATURE-----
>>>>>>>>> Version: GnuPG v1.4.5 (Darwin)
>>>>>>>>>
>>>>>>>>> iD8DBQFGw3UKMkyGM64RGpERAg0wAJ9W1ey+p1fJ9BCj1kngeOTvlSSYKQCgu4kQ
>>>>>>>>> 7e3DquN5wj+Ac/xPMtRmPSE=
>>>>>>>>> =npCT
>>>>>>>>> -----END PGP SIGNATURE-----
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Openembedded-users mailing list
>>>>>>>>> Openembedded-users at lists.openembedded.org
>>>>>>>>>
>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>>>>>>
>>>> ------------------------------------------------------------------------
>>>>>>>> _______________________________________________
>>>>>>>> Openembedded-users mailing list
>>>>>>>> Openembedded-users at lists.openembedded.org
>>>>>>>>
>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>>>>> _______________________________________________
>>>>>>> Openembedded-users mailing list
>>>>>>> Openembedded-users at lists.openembedded.org
>>>>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>> ------------------------------------------------------------------------
>>>>> _______________________________________________
>>>>> Openembedded-users mailing list
>>>>> Openembedded-users at lists.openembedded.org
>>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>>
>>>> _______________________________________________
>>>> Openembedded-users mailing list
>>>> Openembedded-users at lists.openembedded.org
>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> Openembedded-users mailing list
>>> Openembedded-users at lists.openembedded.org
>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>
>>>
>> _______________________________________________
>> Openembedded-users mailing list
>> Openembedded-users at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>
>>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Openembedded-users mailing list
> Openembedded-users at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3303 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.openembedded.org/pipermail/openembedded-users/attachments/20070817/a48392a3/attachment-0002.bin>