[oe-users] Problem generating uImage for gumstix

[Steve Sakoman]

Philip,

I don't have that directory after the build.  Only tmp/deploy/ipk exists.

Should doing a "bitbake task-boot" create the image?  I wanted to start out
with something minimal, but perhaps that is too minimal!

Steve

On 8/17/07, Philip Balister <philip at balister.org> wrote:
>
> There should be something that look like this:
>
> tmp/deploy/glibc/images/efika
>
> probably gumstix instead of Efika.
>
> Philip
>
> Steve Sakoman wrote:
> > That's where I looked initially, but my tmp/deploy directory only has an
> ipk
> > subdirectory.  No likely candidates there!
> >
> > Steve
> >
> > On 8/17/07, Hans Henry von Tresckow <hvontres at gmail.com> wrote:
> >> try looking in the tmp/deploy folder in your build directory. for my
> glibc
> >> builds for poodle they are in tmp/deploy/glibc/images/poodle
> >>
> >> On 8/17/07, Steve Sakoman <sakoman at gmail.com> wrote:
> >>> Hmmm . . . another newbie question!
> >>>
> >>> Where does the rootfs image get placed at the end of the build?  Can't
> >>> seem to find it.
> >>>
> >>> I'm assuming that the following line in the machine conf file is what
> >>> builds it:
> >>>
> >>> EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash"
> >>>
> >>> Thanks!
> >>>
> >>> Steve
> >>>
> >>> On 8/17/07, Philip Balister < philip at balister.org> wrote:
> >>>> Try again. Thanks for your patience.
> >>>>
> >>>> Philip
> >>>>
> >>>> Steve Sakoman wrote:
> >>>>> Philip,
> >>>>>
> >>>>> No joy on the build:
> >>>>>
> >>>>> Connecting to prdownloads.sourceforge.net|66.35.250.217|:80...
> >>>> connected.
> >>>>> HTTP request sent, awaiting response... 301 Moved Permanently
> >>>>> Location:
> >>>>>
> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net[following]
> >>>> <
> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net%5Bfollowing%5D
> >
> >>>>> 20 redirections exceeded.
> >>>>> NOTE: Task failed: Fetch failed:
> >>>>> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2
> >>>>> NOTE: package uboot-utils-1.2.0-r6: task do_fetch: failed
> >>>>>
> >>>>> According to SourceForce the source for u-boot seems to have moved:
> >>>>>
> >>>>> The "U-Boot" Universal Bootloader project provides firmware for many
> >>>> CPU
> >>>>> architectures and boards with full source code under GPL. NOTE:
> >>>> current
> >>>>> source code is available from DENX git repository and FTP server;
> >>>> see
> >>>>> http://www.denx.de/en/Software/GIT
> >>>>>
> >>>>> Steve
> >>>>>
> >>>>> On 8/16/07, Steve Sakoman <sakoman at gmail.com> wrote:
> >>>>>> Philip,
> >>>>>>
> >>>>>> Thanks!  Just did the pull and update.
> >>>>>>
> >>>>>> Build is underway . . .
> >>>>>>
> >>>>>> Steve
> >>>>>>
> >>>>>> On 8/16/07, Philip Balister < philip at balister.org> wrote:
> >>>>>>> OK, if you pull and update, you should be able to build a complete
> >>>> image
> >>>>>>> for the gumstix. I fixed uboot-utils so it compiles mkimage, and
> >>>> added
> >>>>>>> uboot-utils as a dependency to the linux-gumstix bb file.
> >>>>>>>
> >>>>>>> Philip
> >>>>>>>
> >>>>>>> Steve Sakoman wrote:
> >>>>>>>> Koen,
> >>>>>>>>
> >>>>>>>> Thanks for your response.  I'm an Open Embedded beginner, so I'm
> >>>> not
> >>>>>>> quite
> >>>>>>>> sure what to do with your suggestion :-)
> >>>>>>>>
> >>>>>>>> Should the "DEPENDS" statement be added to the gumstix machine
> >>>>>>> definition?
> >>>>>>>> Steve
> >>>>>>>>
> >>>>>>>> On 8/15/07, Koen Kooi < koen at dominion.kabel.utwente.nl> wrote:
> >>>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
> >>>>>>>>> Hash: SHA1
> >>>>>>>>>
> >>>>>>>>> Philip Balister schreef:
> >>>>>>>>>> I can confirm this is a problem building Angstrom for a gumstix
> >>>> with
> >>>>>>> a
> >>>>>>>>>> clean tmp directory. I think the problem is that the kernel
> >>>> build
> >>>>>>> needs
> >>>>>>>>>> mkiamge from u-boot, but the gumstix machine does not build
> >>>> u-boot.
> >>>>>>> I
> >>>>>>>>>> tried building u-bbot for the gumstix, but u-boot contains no
> >>>> config
> >>>>>>> for
> >>>>>>>>>> the hardware. Then I tried building uboot-utils and that failed
> >>>>>>> trying
> >>>>>>>>>> to unpack :
> >>>>>>>>>>
> >>>>>>>>>> org.openembedded.dev /packages/uboot/files/fw_env.config': No
> >>>> such
> >>>>>>> file
> >>>>>>>>>> or directory
> >>>>>>>>>>
> >>>>>>>>>> Any thoughts?
> >>>>>>>>> Yes, DEPENDS = "u-boot-mkimage-openmoko-native" for a 'generic'
> >>>>>>> mkimage in
> >>>>>>>>> STAGING_BINDIR_NATIVE.
> >>>>>>>>>
> >>>>>>>>> regards,
> >>>>>>>>>
> >>>>>>>>> Koen
> >>>>>>>>> -----BEGIN PGP SIGNATURE-----
> >>>>>>>>> Version: GnuPG v1.4.5 (Darwin)
> >>>>>>>>>
> >>>>>>>>> iD8DBQFGw3UKMkyGM64RGpERAg0wAJ9W1ey+p1fJ9BCj1kngeOTvlSSYKQCgu4kQ
> >>>>>>>>> 7e3DquN5wj+Ac/xPMtRmPSE=
> >>>>>>>>> =npCT
> >>>>>>>>> -----END PGP SIGNATURE-----
> >>>>>>>>>
> >>>>>>>>> _______________________________________________
> >>>>>>>>> Openembedded-users mailing list
> >>>>>>>>> Openembedded-users at lists.openembedded.org
> >>>>>>>>>
> >>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>>>>>>
> >>>>
> ------------------------------------------------------------------------
> >>>>>>>> _______________________________________________
> >>>>>>>> Openembedded-users mailing list
> >>>>>>>> Openembedded-users at lists.openembedded.org
> >>>>>>>>
> >>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>>>>> _______________________________________________
> >>>>>>> Openembedded-users mailing list
> >>>>>>> Openembedded-users at lists.openembedded.org
> >>>>>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>>>>>
> >>>>>>>
> >>>>>
> >>>>>
> >>>>
> ------------------------------------------------------------------------
> >>>>> _______________________________________________
> >>>>> Openembedded-users mailing list
> >>>>> Openembedded-users at lists.openembedded.org
> >>>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>>
> >>>> _______________________________________________
> >>>> Openembedded-users mailing list
> >>>> Openembedded-users at lists.openembedded.org
> >>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>>
> >>>>
> >>>>
> >>> _______________________________________________
> >>> Openembedded-users mailing list
> >>> Openembedded-users at lists.openembedded.org
> >>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>
> >>>
> >> _______________________________________________
> >> Openembedded-users mailing list
> >> Openembedded-users at lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>
> >>
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Openembedded-users mailing list
> > Openembedded-users at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>
> _______________________________________________
> Openembedded-users mailing list
> Openembedded-users at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-users/attachments/20070817/26585c86/attachment-0002.html>