Difference between revisions of "Zaurus"
(→zaurus-installer) |
(→zaurus-installer) |
||
Line 1: | Line 1: | ||
+ | Some technical information about the Zaurus machines from http://linuxtogo.org/gowiki/LinuxDevices | ||
+ | |||
+ | * [http://linuxtogo.org/gowiki/ZaurusCollie collie] | ||
+ | * [http://linuxtogo.org/gowiki/ZaurusPoodle poodle] | ||
+ | * [http://linuxtogo.org/gowiki/ZaurusC7x0 c7x0] (corgi, shepherd, husky, boxer) | ||
+ | * [http://linuxtogo.org/gowiki/ZaurusAkita akita] | ||
+ | * [http://linuxtogo.org/gowiki/ZaurusSpitz spitz] (borzoi, terrier) | ||
+ | * [http://linuxtogo.org/gowiki/ZaurusTosa tosa] | ||
+ | |||
Some technical information about the Zaurus machines from http://linuxtogo.org/gowiki/LinuxDevices | Some technical information about the Zaurus machines from http://linuxtogo.org/gowiki/LinuxDevices | ||
Line 11: | Line 20: | ||
For the Zaurus a special kernel+initramfs has been developed. | For the Zaurus a special kernel+initramfs has been developed. | ||
− | This special-purpose kernel is small enough to be flashed on NAND and features a | + | This special-purpose kernel is small enough to be flashed on NAND and features a framebuffer graphical menu for the selection of boot media containing the kernel to be kexec'ed. |
− | + | Multi-partition cards and lots of filesystems supported. | |
− | The kernels to be launched are searched in /boot of each available partition | + | The kernels to be launched are searched for in /boot of each available partition. |
+ | There is a also a configuration file (/boot/boot.cfg) which allows selection of other kernels, custom kernel command lines, and specifies the label and the icon for each instance. | ||
How to install: | How to install: | ||
− | Just unpack zaurus-installer-YOURMACHINE.tar.gz on a free partition: the package contains the kexecboot-kernel and the updater.sh utility. Then proceed as usual for flashing (switch off, pull battery out, insert battery again, before inserting AC plug press OK+Power On | + | Just unpack zaurus-installer-YOURMACHINE.tar.gz on a free partition: the package contains the kexecboot-kernel and the updater.sh utility. Then proceed as usual for flashing (switch off, pull battery out, insert battery again, before inserting AC plug press OK+Power On. In the Japanese Menu select 4 and finally 3 for SD card or 4 for CF). |
[http://downloads.conics.net/pda/zaurus-sl-c700/service-menus/maint-menu.jpg Screenshot] | [http://downloads.conics.net/pda/zaurus-sl-c700/service-menus/maint-menu.jpg Screenshot] | ||
− | For SL-5500 (collie) and optionally for other Zaurus too, flashing is possible just using the routines of the original firmware: | + | For the SL-5500 (collie) and optionally for other Zaurus too, flashing is possible just using the routines of the original firmware: |
reset the unit, Press C, and D button during restart. | reset the unit, Press C, and D button during restart. | ||
Revision as of 12:16, 26 August 2009
Some technical information about the Zaurus machines from http://linuxtogo.org/gowiki/LinuxDevices
Some technical information about the Zaurus machines from http://linuxtogo.org/gowiki/LinuxDevices
zaurus-installer
For the Zaurus a special kernel+initramfs has been developed. This special-purpose kernel is small enough to be flashed on NAND and features a framebuffer graphical menu for the selection of boot media containing the kernel to be kexec'ed.
Multi-partition cards and lots of filesystems supported. The kernels to be launched are searched for in /boot of each available partition. There is a also a configuration file (/boot/boot.cfg) which allows selection of other kernels, custom kernel command lines, and specifies the label and the icon for each instance.
How to install:
Just unpack zaurus-installer-YOURMACHINE.tar.gz on a free partition: the package contains the kexecboot-kernel and the updater.sh utility. Then proceed as usual for flashing (switch off, pull battery out, insert battery again, before inserting AC plug press OK+Power On. In the Japanese Menu select 4 and finally 3 for SD card or 4 for CF). Screenshot
For the SL-5500 (collie) and optionally for other Zaurus too, flashing is possible just using the routines of the original firmware: reset the unit, Press C, and D button during restart.
See: Flashing-collie